The John Menoche Razor Box

A box with 56 1-1/8 x 5/8 compartments the are 4-1/2 inches tall. Inside of box dimensions are approximately 10 x 7 x 8. Construction would be of 1/2 inch quality veneered plywood with biscuit joints on all pieces joined together. Wooden hinge with a stainless steel rod and reinforced with dowel connection to adjacent panels on long side. Inside top to have a red velvet liner. More detail below: I could stain this whole box with a very light Green for you. Top wood Oak Interior wood Oak Exterior wood Oak Interior Length 10 Interior Width 7 Interior Height 8-1/2 including drawer compartments need to be about 4-1/2 inches deep. Razors are normally from 5 3/4" to 6 1/2" long Drawer 1 inch deep drawer with handle (TBD) not found one yet Corner Detail 1/4 in Radius Hinge Wooden Hinge on long side Lock Key lock Handle on top Velvet Insert color Dividers Red, inside top Velvet on as many surfaces as is possible (economical) on the inside surfaces of the dividers to protect the razor handles. 56 5/8 x 1-1/8 inch dividers to accommodate 50+ razors Graphic Design Razor size 4 x 4 inch I understand; you just want the two razors burned, not the whole square of the picture. That is, just the dark grey areas. Graphic Placement Front centered Cost would be $280 + $20 to send = $ 300